Panasonic Fax machine Error messages

If a problem occurs during fax transmission or reception, one of the following messages will be printed on the sending and journal reports 
COMMUNICATION ERROR
(Code: 40-42, 46-72, FF)- A transmission or reception error occurred. Try again or check with the other party.
COMMUNICATION ERROR
(Code: 43, 44)- A line problem occurred. Connect the telephone line cord to a different jack and try again.
- An overseas transmission error occurred. Try using the overseas mode 
DOCUMENT JAMMED
- The document is jammed. Remove the jammed document 
ERROR-NOT YOUR UNIT
(Code: 54, 59, 70)- A transmission or reception error occurred because of a problem with the other party’s
fax machine. Check with the other party.
JUNK FAX PROH. REJECT
-The junk fax prohibitor feature of this unit rejected fax reception.
MEMORY FULL
- The memory is full of received documents due to a lack of recording paper or a
recording paper jam. Install paper or clear the jammed 
NO DOCUMENT
- The document was not fed into the unit properly. Re-insert it and try again.
OTHER FAX NOT RESPONDING
- The other party’s fax machine is busy or hasrun out of recording paper. Try again.
- The other party’s fax machine rings too many
times. Send the fax manually .
- The other party’s machine is not a fax machine. Check with the other party.
- The number you dialed is not in service.
PRESSED THE STOP KEY
- {STOP} was pressed and fax communication was canceled.
Read more:  panasonic fax machine manuel

 

Related post



Newer Post Older Post

0 comments:

Post a Comment

 

Wiki Voip And Fax Tutorials Copyright © 2010 Labloub