Configuring Polycom SoundPoint IP300 SIP Phone 2

1. Enter the URL of the phone as for example http://10.10.10.5 in a browser. This is the IP
address of the phone. Press SIP Configuration. The factory default user name is Polycom
(case sensitive) and password for administrator is 456 and the settings can be modified.
2. Click on the “Sip Conf.” link.
Under the Servers category enter in the following information.
Server 1
Address: sipedu-univ1.tamu.edu
Port: 5060
DNS Lookup: UDPonly
Expires: 3600
Register: 1
Retry Time Out: 0
Retry Max Count: 0
Line Seize Time Out: 30
3. Once done click the “Submit” button at the bottom of the page. The phone will reset to
apply the config.
4. Once phone is done rebooting login to the web page and click the “Registration” link.
5. Under the Registration 1 category enter the following information.
Identification
Display Name: “User assigned to the phone”
Address: username@sipedu-univ1.tamu.edu
Auth User ID: “Username from proxy”
Auth Password: “Password for user assigned to proxy”
Label: “Name of the line as it appears on the phone”
Server 1
Address: sipedu-univ1.tamu.edu
Port: 5060
DNS Lookup: UDPonly
Expires: 3600
Register: 1
Retry Time Out: 0
Retry Max Count: 0
Line Seize Time Out: 30
6. Click the “Submit” button at the bottom of the page. The phone will reset to apply the
config.
7. Congratulations, now you are ready to place VoIP calls !!

Related post



Newer Post Older Post

0 comments:

Post a Comment

 

Wiki Voip And Fax Tutorials Copyright © 2010 Labloub